Cummin Caltem 5.9.0.029

   

1. What is Cummin Caltem?

Cummin Catem is an intensive engineering development software for ECM of Cummin Engines, in a sense Cummin Catem is specialized software for Tuning Cummin Engines.

With Caltem, you can adjust any engine parameters that Cummin Insitee software cannot do, in addition you can easily upload, download engine calibration file, remove the engine speed limit, calibrate fuel, delete emission like Adblue, SCR, DPF, cut EGR, increase power for Cummins Engines.

2. Software Information

• Name: Cummin Caltem
• Version: 5.9.0.029
• Size: 173.2 MB
• Level: Engineering Level
• Market: All Market

2.1. Supported Engine Model

Cummin Catem software supports any vehicle using a Cummin Engine, including Engines from Russia and China.

• Car
• Trucks, tractors, construction machines
• Generator
• Marines
• And many other lines

A new version of Caltem 5.9.0.029 has been released. This release includes the following features and bug fixes.

Following are the release contents for Caltem v5.9.0.029:

New Engine Product Support

• BQY, BQX, BQW, BQV, BQU, BQS, BQT, BQR, BRD, BRE, CSR, BRB, BQE, BQG, BQJ, BQM, BQN, BRC

2.2. New Features

• OTT - Console Window to display communication with ECM over UDS protocol
• Support multi-channel datalink adapter
• Cal compare CLI support for CSAR
• Added provision to display 2-byte and 3-byte PCode in Fault window.
• Added calibration information to the calibration download log file
• Display units along the axis of tables and table units - both Core2 and CSAR
• Provide Auto Reconnect functionality in When using Unlock tool in Calterm
• Add a new CCSH interface to start monitoring with fault logging for a CSAR module

2.3. Critical Fixes and Improvements

• 9290565 - Overlay's "Back" button should reset options as per selected overlay mode
• 8710016 - Calterm crashes when running CCSH, Calterm for more than 10 hours
• 9313519 - Tool is not reading range limits correctly for a parameter
• 9387857 - Multi dimensional arrays elements arrangement in cdfx export
• 9376613 - please provide the ability in Caltem to ignore if there is a space at the end of the parameter name
• 9290570 - Change the name “Range Limit Options” to “Range Limit Settings” in overlay
• 9271045 - Unblock All Faults are adding blocked selected faults twice in a fault list
• 9369007 - Requesting to display the A2 cell log file in standard date and time format
• 8996290 - Automatic Modue connection is not removing previously detected ECM information after detecting.
• 9149052 - CSAR - Caltem Cal Compare incorrectly displays axis names/labels for 'Val_Blk' parameters
• 9452206 - Caltem exports Hex values into .cdfx as enumerations
• 9447068 - Display units along the axis of tables and table units - both Core2 and CSAR
• 9373148 - Caltem Crash issues on 5.8.0.020 UAT build
• 9437946 - CSAR overlay issue with table parameters in Calterm
• 9310218 - while detecting module, Caltem shows the error mesage "object refernce not set to an instance of an object" in event log
• 9264072 - Add a new CCSH interface to start monitoring with fault logging for a CSAR module
• 9310232 - Event log continuouly updating for the fault codes for OTT connection

• 9495886 - Caltem Crash on 5.8.0.027
• 9208919 - Caltem Save Screen Prompt not appearing
• 9103275 - Display all DTC fault types in Extended fault view in Calterm
• 9534184 - Caltem - Divide Option has issue with the Subfile changes
• 9677037 - Add Calibration file Name & path in Calibration download reflash log
• 9753419 - Provide Auto Reconnect functionality in When using Unlock tool in Calterm.
• 9813344 - CLI overlay report a status of the overlay success or fail
• 9753483 - Caltem 5.8 fails to overlay the C_CAN2_Configuration value
• 9728529 - Unlock Tool does not work for CM2450E/H/J series.
• 9833750 - Integrate CSAR Files Types (a2l, hex, cdfx) to The Caltem Command Line Interpreter Compare Feature.
• 9810061 - Make links accessible from the pop up itself
• 9708598 - Old .cbf is not deleted automatically while connecting through calterm through Open Module.
• 9708588 - Caltem 5.8 is still using old .cbf files even with " Keep Auto- generated cbf file after being used by calterm "  check box off
• 9673379 - Execution result is not checked for Set SessionAccess() for UDS
• 7851377 - Please provide the ability in CCSH to select a channel to connect with ECM
• 7851392 - Caltem does not properly support RP1210 channel selection for devices when connecting to an ECM.
• 9235811 - Multiple Channel Selection option broken
• 9943513 - Support UDS Operations hex response & request in ConsoleView
• 10031908 - Engineering range limits warning is not showing correct message for x/y axis values.
• 10065454 - The Save button is not available for UDS protocol
• 9022831 - Test Cell users  requested  not to display the pop up when REL change lock is requested from ASAM and don't want changes to be saved
• 8810022 - Cannot monitor the parameter FuelInjRef.ppFuelSysCmdStruct.deStruct.FsCylStruct[0].FuelSoiVect[0:0] using Caltem-ASAM
• 10303752 – Caltem 5.8 is having  reconnection issue and intermittent crash issue after key cycles
• 10293518 - Need to performe double click to select check box.
• 10293655 - How to used commands tab from fault information windows.